New Holland L225 L230 C232 C238 Service Manual
L213 / L215 / L218 / L220
L223 / L225 / L230
200 Series Skid Steer Loader
C227 / C232 / C238
200 Series Compact Track Loader
Avoid filling tanks using cans or inappropriate pressurized fuel delivery systems which may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of them contain substances which may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when draining off used engine coolant mixtures, engine, gearbox and hydraulic oils, brake fluids,etc. Do not mix drained brake fluids or fuels with lubricants. Store them safely until they can be disposed of in a proper way to comply with local legislation and available resources.
• Modern coolant mixtures, i.e. antifreeze and other additives, should be replaced every two years. They should not be allowed to get into the soil but should be collected and disposed of properly.
• Do not open the air-conditioning system yourself. It contains gases which should not be released into the atmosphere.
Your NEW HOLLAND CONSTRUCTION dealer or air conditioning specialist has a special extractor
for this purpose and will have to recharge the system properly.
• Repair any leaks or defects in the engine cooling or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding as penetrating weld splatter may burn a hole or weaken them, allowing the loss of oils, coolant, etc.
New Holland L225 L230 C232 C238 Service Manual
Contents
INTRODUCTION
HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS A
PRIMARY HYDRAULIC POWER SYSTEM A10A
SECONDARY HYDRAULIC POWER SYSTEM A12A
HYDRAULIC COMMAND SYSTEM A14A
HIGH-FLOW HYDRAULIC POWER SYSTEM A16A
ELECTRICAL POWER SYSTEM A30A
LIGHTING SYSTEM A40A
ELECTRONIC SYSTEM A50A
FAULT CODES A50A
ENGINE AND PTO IN B
ENGINE B10A
FUEL AND INJECTION SYSTEM B20A
AIR INTAKE SYSTEM B30A
ENGINE COOLANT SYSTEM B50A
STARTING SYSTEM B80A
TRANSMISSION, DRIVE AND PTO OUT C
TRANSMISSION Hydrostatic C20F
AXLES, BRAKES AND STEERING D
Final drive D15A
Final drive Hydraulic drive D15C
STEERING Mechanical D20B
PARKING BRAKE Hydraulic D32C
WHEELS AND TRACKS Tracks D50B
WHEELS AND TRACKS Wheels D50C
FRAME AND CAB E
FRAME Primary frame E10B
SHIELD E20A
84522361 15/06/2011
USER CONTROLS AND SEAT E32A
USER CONTROLS AND SEAT Operator seat E32C
USER PLATFORM E34A
ENVIRONMENT CONTROL Air-conditioning system E40C
SAFETY SECURITY ACCESSORIES Safety E50B
FRAME POSITIONING F
STABILISING Ballasting F20B
TOOL POSITIONING G
LIFTING G10A
TILTING G20A
LEVELLING G30A
SECONDARY FUNCTIONS Hydraulic G90C
HITCH AND WORKING TOOL H
BOOM Lift H20B
ARM TOOL ATTACHMENT Tilt H30C
SINGLE ARM Lift H40B
SINGLE ARM TOOL ATTACHMENT Tilt H50C
EXCAVATING AND LANDSCAPING J
DIGGING Non-articulated digging tools J20B
CARRYING Articulated tools J50B
COUPLING Mechanical coupling J80B
COUPLING Hydraulic coupling J80C